HOME
 

BOUNDLESS SOLUTIONS IN CORROSIVE HEAT TRANSFER AND PROCESS EQUIPMENT

P.O. Box 312 Clark PA 16113 - Phone: (724) 962-8717 - Fax: (724) 962-8722

 
 
 

Who Is APEX ?

 

APEX Engineered Products is a leading manufacture of corrosion resistant heat transfer and process equipment solutions. Our specialty is in fabricating equipment using REACTIVE METAL, GRAPHITE and ADVANCED CERAMIC material. Our 30,000 square foot ASME Code manufacturing facility is located in Clark, PA which to many is considered the industrial heartland of America. APEX boasts one of the most diverse product lines of any heat transfer company, including shell and tube, immersion coils, process tanks, skid systems, and many other types of custom fabricated equipment. APEX also a number of engineers from various disciplines on staff including, mechanical, chemical, and material science, with a combined experience of 130 years + in the industry.

 

  APEX's manufacturing facility is a full ASME Code shop that has both a "U" & "R" Code Stamp. Being an ASME Code shop allows APEX to manufacture new equipment as well as repair existing equipment, to ASME Code standards.

APEX Engineered Products was formed in June of 2005 by merging two existing companies, Industrial Systems and Services with Universal Titanium. Both companies brought different areas of specialty in corrosive heat transfer and process equipment solutions. The merger allowed APEX to offer one of the widest range of heat transfer and process equipment solutions available.

       
  Industrial Systems and Services, Inc.
Established In 2001
  +

 
  Universal Titanium, Inc. June 2005
Established in 2002
 

 

 

 

 
 
       
 
 
 
 

APEX ENGINEERING CAPABILITIES

 
 

At APEX our people our one of our greatest resources. Our Engineers at APEX have over 130 years of experience over a wide range of industries. APEX can offer existing replacements, new equipment, or upgrade in design if required.  Below is just some of our engineering capabilities
   

  • Complete Mechanical Design: AutoCAD and PV Elite

  • Utilize All Major Design Programs: Aspen, B-Jac, & HTRI

  • ASME Section VIII, Div 1 "U" Stamp

  • ASME Section VIII, Div 1 "R" Stamp

  • On Staff Chemical Engineer

  • On Staff (3) Mechanical Engineers

  • On Staff Metallurgical Engineer

  • On Staff Registered Professional Engineer

  • Complete single and two phase design capabilities

 

 

 
 

MANUFACTURING CAPABILITIES
 

30,000 Square Foot Facility
 

(3) 5 Ton Overhead Cranes
 

Welders Qualified Per ASME Section IX
 

Segregated "Clean Room" For Reactive Metal Welding
 

ASME Code "U" & "R" Stamp
 

WELDING

 FORMING BENDING SHEARING/CUTTING

MACHINING
 

TIG

Brake Press

Shears: 1/4" x 96"

CNC Vertical: 14" x 48"

 

MIG

Pitch Plate Rollers

Iron Worker: 5 Tons

Manual Vertical Drill: 11" x 40"

 

SPOT

Tube Bender

Plasma Cutters

Radial Arm Drill:

48" x 48:

 

Weld Positioners

Various Sheet Rollers

Bandsaws:

Various Lathes

12" x 12", 24" x 24"

13" x 72", 28" x 74"
         
  IMMEDIATE ACCESS TO THE FOLLOWING EQUIPMENT
 

Water Jet Cutting 96" x 240" x 2" thick plates

Plate Rolls 1"  thick x 120"
 

2000 Ton Press Break: 14 ft wide by 1" thick

600 Ton Press Break: 20ft wide x 1/2" thick
 

CNC Punch Press

King Vertical Boring and Turning Mill
 

Vacuum Annealing

CNC Plasma Cutting
 

Sandblasting

Radiography Testing
 

Stress Annealing

Acid Cleaing
 

Ultrasonic Testing

Teflon (PFA) Coatings
         
 
HOME    PRODUCTS    SERVICES     MATERIALS    ABOUT APEX    ON-LINE BROCHURES    CONTACT/RFQ   Copyright 2006 APEX Engineered Products All Rights Reserved.